Overspray is basically a component that ends up in the surface of the vehicle especially on the clear coat surface. And removing this clear coating is a very difficult process.
But the fact is that when it comes to the fact of removing overspray it can be a very difficult job. This because one never wants to damage the clear coat while removing overspray.
And to be exact removing overspray without damaging the clear coat is a very complicated and tiresome work.
While thinking about removing overspray one should definitely keep in their mind that overspray can be different types. Some of them are not very difficult to remove but some are very difficult to remove without damaging the clear coat.
For example, if the overspray type is fire soot or chemical fallout then it should be kept in mind that these types of overspray cannot be removed without removing the clear coat and this is because these types of overspray deeply bond with the clear coat surface.
This article will mainly follow the reasons for overspray and also the removal process of it without harming or damaging the clear coat.
Creation of Overspray
The creation of overspray can be from a very silly and mundane reason. For example when you are just cleaning your car and a sudden thought appears of painting the damaged or worn out parts. And this very decision of painting these damaged parts can be the reason of overspray.
Weather is very important in the case of car maintenance. This is because if somebody uses paint rigs or paint rollers in bad weather then it can result in overspray.
As indoor “Paint booths” and “Metal foundries” have reneged in the filters and this lead outside then overspray or fallouts on the vehicle surface can be created very easily.
Another very important reason for overspray can be exposed to the chemical or petroleum industries. For example, if one lives in an area where there are a lot of chemical or petroleum industries then definitely their car will exposed to it and in those industries are constantly working and the blowouts over the plant stack could be very common and this result in overspray which will damage the vehicle.
Removing Overspray without Damaging the Clear Coat
As previously mentioned the task of removing overspray is very complicated and difficult work. Here also one should keep in mind that the goal is not only removing overspray but also removing without damaging overspray.
But there are some ways by following those ones can remove the overspray even those which are embedded very deeply with the surface and also with this process the clear coat will not be damaged.
This process of removing is also very wallet friendly as it will not cost much to buy all the important tools.
Before going for it one should talk to a specialist who can be very helpful with some advice but if the situation of the overspray is that bad then it is likely to be very smart if it is done by a professional.
First Method of Removing Overspray
Getting a Clay Bar:
As the title suggests you will need a clay bar. But to get a clay bar you have to be careful about that you get an authentic one or this may get you overspray situation much worse.
This is not a myth but a fact that a clay bar very useful and almost like magic when it comes to the fact of cleaning overspray from all different surfaces. Clay bar is effective even when the surface is glass type.
Now to talk about the price range it will definitely vary regarding the quality and the materials. As a result, the price range is around 5-25$. But while getting a clay bar you should be careful about the surface of the car and one should take it according to surface.
And obviously one will be needing a lubricant for this task and this is because the lubricant will make the surface more slippery and it will make the clay bar glide over the surface very easily.
The lubricant can be any simple cleaning spray or also can be soapy water and there is also branded lubricant spray from this job.
Official work starts from here. As you have the clay bar so now you can start cleaning the surface first. And to clean the surface you will also need a clay bar.
The fact is that new clay bars are a bit hard this is why one needs warm water to soak the bar and by dipping in the water and also squeezing makes it softer and softer bar surface is more useful for cleaning.
As the bar is soft now it is time for cleaning so clean the surface properly.
As previously mentioned lubrication is a vehicle that makes the process of using the bar easy and effective. Overspray is basically the dry patch of the car and this is why lubrication is important.
Soap water, lubrication spray will make the surface slippery which will help to use the bar properly.
Using the Clay Bar:
This is the main part of the method. As the lubrication is done now it is time for rubbing the bar. One needs to start very slowly rubbing the targeted areas.
As it rubbing the patchy area there will be a type of tension because both will resist each other. But this tension is nothing to be feared because most of the people get scared of damaging the surface.
This resistance is important because this tension will increase the effectiveness of the bar and the more time passes this dryness will be eradicated causing the surface to be smoother. And this will make the overspray to be removed without damaging the surface.
After this, it is time for final touches. And for this one will need a microfiber towel or cloth. One can easily clean the surface with these once the overspray is removed.
This cleaning will make sure that the surface is clean from the dirt and derbies.
Second Method of Removing Overspray
This is a very famous fact about alcohol that this component called alcohol can easily remove any kind of paint or overspray and this is why alcohol is a very useful instrument for removing overspray.
One first has to take a little amount of alcohol and then he or she has to rub the affected points of the vehicle. The targeted areas should be the overspray area and then the alcohol rubbing process should be continued to add that extra layer of alcohol over the overspray for functioning properly.
While this rubbing process one needs to be sure about certain things for better results. For example, the quantity of the alcohol will vary regarding the area of the overspray and also for processing one needs to be careful the quality of it.
Processing of the Alcohol:
After using the alcohol over the overspray comes the waiting part. One needs to wait for the alcohol to merge with the surface and the overspray points. One should wait till the alcohol is properly dissolved with the overspray surface.
This process will definitely take some time but merging time depends on the quality of the alcohol and also this alcohol quality is important for the merging process.
As a result, one should wait a bit to assure oneself that the alcohol is sitting on the top of the overspray which will try to process the damages and the dryness over the surface and one should think that it is good to go for further steps.
After the alcohol is properly dissolved and merged with surface then it is time for cleaning and the cleaning requires a microfiber cloth or towel to clean the damaged overspray surface.
Alcohol is very effective in the case of cleaning off the overspray but sometimes alcohol is not enough and this is when a little extra work is needed and this extra work is all about scrubbing way the overspray surfaces.
Lubricating the Surface:
After cleaning the surface then comes the part of maintenance and to maintain this clean surface for far too long is to lubricate it with proper lubrication such as soap water or spray and by lubricating one easily remove the alcohol with some water and a clean towel by rubbing the surface. As a result, the alcohol will not harm the clear coat surface.
Afterward of the Removal
While removing the overspray the best results only can be achieved through the following process very neatly. If a possible one definitely should get the best quality clay bars, alcohol for getting the expected results.
The article mainly follows the process of removing overspray without damaging the overspray. The article shows two methods such as clay bar method and alcohol method. Both of them are very effective if properly followed in the given process.
As a result, if you are someone who wants to remove overspray and take some time while reading the article and clear it by using the simple tool and methods given in the article.